iOS hackers Siguza and Tihmstar have just released a new iOS 10.3.3 jailbreak. Here’s how you can download and install doubleH3lix jailbreak on your iPhone, iPad, and iPod touch.
Table of Contents
What is doubleH3lix?
doubleH3lix is a jailbreak tool developed for 64-bit devices running iOS 10-10.3.3 firmware. It is developed by Siguza and Tihmstar.
It is based on Siguza’s v0rtex exploit, KPP bypass, and a patchfinder that provides support for all versions out-of-the-box.
Think of it as a 64-bit version of the original h3lix jailbreak.
Moreover, all issues present in g0blin jailbreak like faulty GPS and buggy Touch ID are not present in this tool. The developers also intend to open source this tool sometime in the future.
All these features make it a solid alternative to g0blin, yalu102, and even Saigon. Therefore, if you are currently using any of these tools, you might want to switch to this improved jailbreak tool.
Here’s how you can jailbreak your Apple device with it.
But before you move onto the tutorial, ensure you have a compatible Apple device and firmware version.
Which versions and devices are compatible?
Firmware
- 10.0
- 10.0.1
- 10.0.2
- 10.0.3
- 10.1
- 10.1.1
- 10.2
- 10.2.1
- 10.3
- 10.3.1
- 10.3.2
- 10.3.3
Devices
iPhone
- iPhone 5s
- iPhone 6
- iPhone 6 Plus
- iPhone 6s
- iPhone 6s Plus
- iPhone SE
- iPhone 7 (not supported)
- iPhone 7 plus (not supported)
iPad
- iPad Air
- iPad Air 2
- iPad Pro
- iPad mini 2
- iPad mini 3
- iPad mini 4
iPod
- iPod touch 6
Download doubleH3lix
- RC8
- RC7
- Experimental build (latest version)
- RC6
- RC5
- RC4
- RC3
- RC2 (unreleased)
- RC1 (unreleased)
Updates
- March 18 – RC7 improves the success rate for A9 device users. fixes issues with patchfinder on RC7.
- March 7 – A new experimental build fixes success rate on A9 devices.
- March 3 – RC6 fixes kernel exploit, offset finder bugs, and adds better support for iOS 10.0.2.
- March 2 – RC5 adds better compatibility for pre-iOS 10.3 versions.
- March 1 – RC4 is out. It fixes error 1426.
- March 1 – RC3 adds updated Cydia package.
- March 1 – RC2 fixes a KPP bug.
Requirements
- A 64-bit iPhone, iPad, or iPod touch
- iOS 10-10.3.3 firmware
- A computer with Windows, macOS, or Linux
- Cydia Impactor
- Internet connection
How to jailbreak iOS 10-10.3.3 with doubleH3lix
Step 1 (Optional) If you are using any other jailbreak tool, reboot your device and remove it.
Step 2 Download the doubleH3lix IPA file using the link given above.
Step 3 Launch Cydia Impactor utility form your computer. You can download it from this link if you don’t have it installed already.
Step 4 Drag the IPA file you downloaded in “step 1” onto Cydia Impactor’s window. Enter your Apple ID username and password once it instructs you to do so.
Step 5 Wait for the installation process to complete. Once it’s over, the doubleH3lix application will appear on your home screen. However, you will receive an error if you try to open it just yet.
Step 6 To fix this issue, open the Settings app and navigate to Settings > General > Profiles & Device Management. Tap your Apple ID email and “trust” the aforementioned app.
Step 7 Tap the jailbreak button to start the exploitation process. Once it’s done, Cydia will appear on your screen.
How to re-jailbreak your device after rebooting
doubleH3lix is semi-untethered in nature and will make you lose your jailbreak once you reboot. To get back into jailbreak mode, you must follow the re-jailbreak procedure.
Step 1 Launch the jailbreak app from your home screen.
Step 2 Press the Kickstart button.
Step 3 Wait for the exploitation process to get over. Once it’s done, all your tweaks will start working again.
That’s all there’s to it! If you decide to use this jailbreak tool, please leave a comment detailing your experience below.
For more jailbreak tools and downloads, follow us on Twitter and Facebook.
Just trying to determine which JB is best to use on I-Phone 6S Plus iOS 10.3.3, G0blin vs. Meridian (via TotallyNotSpyware) vs Meridian (via TotallyNotSpyware)…
Meridian is recommended.
Hi I have a iphone 6s Plus with 10.3.3 and wanted to know which JB is best to use with G0blin vs. Meridian vs. DoubleH3lix (via TotallyNotSpyware).. I know with Totally it is webbased so theres no sigining IPAs unlike G0blin… Which do you recommend??? Also I do Meridian and Double install Cydia or no?
1. Can I install doubleH3lix using Cydia (not Cydia Impactor)?
Can you tell me which source to add so I can install it using Cydia?
I already jailbroken by device using Safari Jailbreak (totallynotspyware.lol) and selected doubleH3lix (instead of Meridian).
I want a more independent means to re-jailbreak my device just in case i couldn’t access the internet and use Safari Jailbreak.
2. If I use Cydia Impactor to install doubleH3lix instead, will i need to resign it every after 7 days?
Thanks
1. No, that’s not possible. However, you can use this Ignition.fun to install it directly from the web.
2. Yes, you will have to resign it after every 7 days. If you use Ignition, your app will remain signed until its enterprise certificate works.
Hope this helps.
Hey, I installed Double H3lix but cant upgrade Cydia. I keep getting DPKG_LOCKED . my iOS is 10.1.1 Ipad Air 2. Yalu and Yalu dark dosent even jailbreak my Ipad. I have tried Meridian and G0blin too. None of them jailbreak my Ipad. Double H3lix could but he cydia package isnt upgrading.
Try using this tool – totallynotspyware.lol
Thank you works perfectly. Do i need to install extender to re-sign doubleh3lix?
Yes, you should install it for easy resigning but it’s not mandatory to do so. You can still use Impactor to sign it whenever it expires.
i restored my iphone and jailbreaked with doubleh3lix, after jailbreaking i got ” dpkg_locked” error in cydia. what to do?
Install Meridian and reinstall Cydia with it.
I got the same error ” dpkg_locked” with meridian and g0blin also . Please help me
Did you reinstall Cydia with Meridian?
Hi I jailbroke a friend’s device previously jailbroken with Goblin iPhone 6+ 10.3.3…. deleted goblin app in non jailbroken state installed doubleh3lix from ignition signing service, jailbroke first attempt.
Previous tweaks were already installed and working all good. Installed some new ones I know were compatible (I made them) but not paying close enough attention I hit “upgrade all” after new APT update by Saurik. What also updated was Appsync and Extender, and caused mini-bootloop. Luckily hard reset eventually got it to load in non-jailbroken state. Tried to re-jailbreak in no substrate mode and it went back into the “boot loop”. Seemed like exploit failed. Takes several minutes for hard reset to get phone to finally boot up successfully.
Any tips for how to remove the tweaks I’m 99.9 % sure caused the problem and rejailbreak? Basically how to rejailbreak in no substrate mode in a way to increase chances of exploit working. Find my iPhone was off but not Touch ID if that makes a difference. (It jailbroke originally with Touch ID on)
Thanks in advance!
Hello, iOS Tweaker. Your tweaks are amazing!
I would recommend running Cydia Eraser on that device. Can you install it from Cydia by going back to g0blin?
does double h3lix has cydia substrate (safe mode) and preference loader?
Yes, it does.
Help!
[x] Fail to fetch http//:repo666.ultrasn0w.com/ ./InRelease Clearsigned file isn’t valid, got ‘NOSPLIT’ (does the network require authentication?)
[x] Some index files fail to download. They have been ignored or old ones used instead.
Remove that repo.
I am using ios 10.3.3 with the latest doubleh3lix jailbreak. The jailbreak is working fine ut cydia crashes instantly when I try to open it and I can’t reinstall the jailbreak. What can I do?
What error is the jailbreak app throwing?
is there any way to jailbreak without computer
im using iph 5se ios 10.2.1
Yes, you can use doubleh3lix tool from Panda Helper.
same after kick start the phone reboots even after that both cydia oe anemone crashes instantly
Keep retrying it. The exploit takes time to run successfully.
Put your phone on airplane mode and try it if it doesn’t work go to settings general reset and reset al settings that should fix it
我也是相同問題 使用Revoke Certificates 和 Impactor 安裝IPA 都出現錯誤
http-win.cpp:160
Peer certificate cannot be authenticated with given CA certificates
SSL certificate problem: self signed certificate in certificate chain
Follow this tutorial.
Nosplit
I’m having the exact same issue
I am running 10.3.2 on Ipad Mini 4 and the jailbreak went fairly smoothly aside from some certificate revoke issues but figured that out – not on you guys. My problem lies when it randomly rebooted after working for a few days however was able to accomplish what I needed to do with WinSCP. I hit KICKSTART and all was good…for a few hours.
The system rebooted again and now when I hit KICKSTART it just reboots with no jailbreak…any help would be greatly appreciated…
Try using Cydia Eraser and then re-jailbreak.
I was able to jailbreak again…many times. Seems the most it will last is 1 day or sometimes hours…have not tried Cydia Eraser. Do you think it will help? Sometimes just need to kickstart but most times I have to go through reinstalling the .ipa.
Meridian jailbreak released, download it from this link – https://yalujailbreak.net/meridian-jailbreak/.
Thanks for the reply! Sorry new here…what steps to remove the H3lix jailbreak?
Welcome, Tommy. Are you using h3lix or doubleh3lix?
Gian,
Unable to respond to you … no REPLY option. Running DoubleH3lix
Thanks for the reply! Sorry new here…what steps to remove the DoubleH3lix jailbreak?
You can this tool.
Hey I’m using 10.2.1 and i want to jailbreak my phone . If my phone will jailbreak Cydia Perfectly working ?
Yes, it will work perfectly.
Use Saigon!! Works perfect on my iPhone 6s Plus … Have to re jailbreak every so often if my battery runs down or such… but With minimal effort always get it back usually first or second try… Trust me Saigon works!!! Might have to try it 10 or more times… it is frustrating with rebooting in between attempts… but I assure you it’s worth it… I’ll help all I can if needed…
Tim
[email protected]
Good luck breaking out… Saigon has really been the 💩!!
Ps. My above comment was for 10.2.1 users only! That’s what I’m running. 10.2.1 on 6splus.. FYI!!!
I’m on ios10.3.2 on ipad pro 10.5 inch is it supported
And should i update to ios 11 or stay on ios 10.3.2
Yes, it is supported. You should stay where you are if you want a jailbreak.
So I dont know if anyone else had this issue but when using the cydia impactor and the newest IPA file on this site to try to install the app on my iphone 6s plus running 10.3.3 i get this error message half way through the install at the point the install says “GeneratingApplicationMap”
Error
./plist.hpp:201
not PLIST_STRING
CFBundleIdentifier
org.tihmstar.doubleH3lix
[Satus]
After getting this error message and clicking ok on my computer the app is installed on my iphone and i can go into settings trust developer and open the app, but if i hit jailbreak my iphone screen goes black and just restarts. I believe there might just be something wrong with my iphone because ive tried a few other jailbreak methods but always got the same error message but with ………… with a variant of the other app ive tried. Ive never been able to successfully jailbreak my iphone. My question is this because something is wrong with the phone itself or OS and is there anything i can do to get rid of this error? long time ago the cydia imactor wouldnt even read my iphone as an iphone it would just show ?(?????????) under the device which i looked for all over online and couldnt find an answer to why it would display as that. i assume its corrupt or something because ive had many issues with this phone. if someone could get back to me i would appreciate it. id really like to jailbreak my phone and so far NOTHING has worked.
Is the app appearing on your home screen?
iPhone 7 plus supports doubleh3lix ?
No.
Hello I have a iPhone 6s I accidentally deleted the helix certificate in the settings . I tried to restore my phone so I could remove Cydia and re install , but sadly I think I messed things up. Is there away around this ?
Which version are you currently on?
I want Cydia ios 10.3.3 6s
Hello! Hopefully you still answering to these. I successfully installed the RC8 jailbreak on my iPad Air 1 running 10.1.1. The issue comes when i try to install any tweak. It appears mobilesubstrate is not installed in this JB and I can’t find any way to make it work. Also the repos don’t fully update. I get a string of red and yellow errors.
Any help would be appreciated.
This tool has a lot of issues. Try going back to Yalu.
Hello Dear
Dear after all processing & exploitation process , device reboot itself . After restarting CYDIA never comes on screen Sir . What should i do ??? everything is done flawlessly & perfectly as mentioned .
Kindly do tell me should i install cydia by myself or Double helix will do it automatically .
Regards
LABIB EJAZ
Which device do you own? It will install Cydia automatically.
Hello, i don’t know if you still reply to these comments but i’ll give it a shot.
I’m trying to Jailbreak my iPad Air 2 the past couple of days. I’m on 10.3.3 vanilla.
I tried several jailbreaks. First g0blin, then Meridian and finally doubleH3lix (RC8)
So far nothing really works. g0blin crashes (a lot), Meridian installs Cydia but it crashes, and H3lix says Jailbreak successful but Cydia refuses to start once again.
On /r/jailbreak a guy suggested to remove Cydia app with ifile, cause it might be corrupted from Meridian. iFile for non jailbroken devices refuses to show me files in the folders. So, I reinstalled Meridian, removed Cydia from my iPad, uninstalled Meridian and tried H3lix once again. Sadly with the same results: H3lix says jailbreak complete, resprings, but Cydia simply crashes after 1-2 seconds of loading.
Is there any hope for me, or should i just give up and upgrade to 11.3.1 and wait for a future Jailbreak?
Thanks a lot!
Hello, Steven. I reply to each and every comment here. Meridian’s Cydia isn’t working properly as of now. TRy an iCloud wipe and then retry. As far as updating is concerned, you can do so but don’t get your hopes up for a full jailbreak anytime soon.
Hello
Dear i did everything as instructed but on pressing kickstart it says ” Error can’t find offsets”
what should i do now ?? kindly help
Which device do you have?
Hi,
Do I need to reinstall all the apps after the jailbreak? and after 7 days, do i need to reinstall the apps after re-jailbreak? Will the jailbreak delete my photo and music?
1. No, you only need to re-install the jailbreak app.
2. No.
3. No.
Hello, I’m using the latest version, however after jailbreaking, Cydia just refuses to update its sources. I keep getting yellow string in a “database” box that states things along the line of unable to read /etc/apt,,,, stuff like that. Help? I have an Ipad Pro running 10.3.1
Can you please send a screenshot?
i run into bootloop after clicking jb app on rc6 it says kernel exploitfailed and then bootloop began how to fix it?
If you are in a bootloop, try performing an iCloud restore.
for that to work i need to access the internet and homescreen first
i cant pass apple logo . Im am bootloop in a non jailbroken state.
Yes, that will only work if your Wifi was enabled. I’m afraid you will need to update your device with iTunes now. But before you do that, try putting it in DFU mode and then kicking it out of that with Reiboot.
I did everything I could.I also used reiboot to kick out in recovery mode but sadly it failed.Thank you for giving me the chance to experience such happiness with this Jailbreak. The last option I have now is that I will update to 11.3 and wait for jailbreak and we’ll see if I can buy another ios device.
You are welcome. I suggest going to iOS 11.3 as it has plenty of exploits available. Also, did you try Recboot? If not, try that.
have upgraded to RC8 and my tweaks installed before do not work. What I can do?
Downgrade to RC7 and check if it causes any issues.
Iphone 6, using RC8, ios 10.3.3. I try to install doubleH3LIX and near the end I get this error code:
plist.hpp:201
not PLIST_STRING
CFBundleIdentifier
org.tihmstar.doubleH3lix
[Status]
None of the other files on this site work, not RC6 or experimental build. It never finishes transferring thru the Impactor program.
Try downloading it from an installer such as Panda Helper.
want to jailbreak iOS 10.3.3 which version shud I go for rc ?
The latest version is fine.
So after a lot of time spent clicking kickstart and it just restarting. I finally managed to get the jailbreak working again. Here is the method I used to get this working le time know if his works for you! (Using RC8 6s 10.3.3.)
-Click kickstart then immediately hold volume up (this make substrate not work but able to open Cydia)
-Delete tweaks (might not have to but I did in case there was a faulty tweak that caused this)
-Go to installed click Cydia substrate reinstall.
-open doubleH3lix click run uicache.
This worked for me but I only tried it once.
Still having this random restart thing.. using RC8… need some help..
There’s no fix for that, unfortunately.
fuck sakes. I am here cause I am on yalu and it randomly restarts. I was hoping double helix would fix that. fml, no sense in me switching then….
My phone restarted overnight or something and went to its regular state but I can’t open h3lix to kick start. Crashes within seconds of trying to open. Had been workin fine and kick started previously as well. Any ideas?
Try signing it again with Impactor.
I first downloaded double helix rc8 work perfectly and then after few days when I press kickstart button it jailbreak and respring but cydia don’t open some other tweaks like filza open but not fully functional and when I open double helix it say run ui cache then uicache failed and goblin not even workin when trying it please any fix I’m on ios 10.3.3 iPhone 6s
Delete the jailbreak app and install it via Panda Helper VIP here.
I am currently running doubleH3lix RC6 on iPhone 6 ios 10.3.1, which is working fine. Should I upgrade & install RC8?
Yes, you should.
well if you don’t want random reboots or errors don’t update I cant get Rc8 work but rc6 is working fine iphone 5s 10.3.1
Can u please send me rc6 ipa
I just downloaded R6 and impacted it onto my “iPad Pro 10.5′ ios 10.3.3” once i tried jailbreaking it i got the Error KernalExploitFail and my ipad restarts without a Jailbreak, is there any fix i can apply to make it work?
Try g0blin until I figure something out for this error.
Hi all,
I recently switched from g0blin RC2 to DoubleH3lix RC6 on my ipadmini 4 ios 10.3.1
I noticed that “backboardd” always uses between 6 and 10% of CPU usage.
I think the cause of the battery depletion.
I have nothing more Cydia, BatteryLife, Cydia Erazer, DetailledBatteryUsage, Ext3nderInstaller, MTerminal and Top installed.
I do not use my device to be sure that it is not me who discharges the battery.
After 3 days, I lost 80% of the battery
Did any of us notice the same behavior?
Did anyone of us noticed that too ?
Try removing detailedbatteryusage.
Done, even i don’t think that going to correct anything. I’ve restored via cydia eraser & only install Top & Mterminal to see process and “backboardd” always use 6 to 10 % of cpu. all the time 24/24. I’ve installed detailledbatteryusage only to see the graphic of .I fully charging my device, after that I’m not using it (I have a mini2 10.2 Yalu). so I’m not using my device, device locked, airplaine mode and after few hours I can see on the graphic a constant battery drain.
I’m not dreaming, it’s a fact. I don’t know why, I don’t know how.
Anyway I hope Tihmstar and doubleh3lix team could try to check that.
Thanks to all
Welcome, I have no idea why that’s happening really. No other user has reported this so far. Try switching jailbreaks (use g0blin) and check if this happens again.
Already try
Too bad
No idea what’s going wrong. I suggest waiting for Meridian jailbreak that is more stable than all these tools.
Hello thank you for the jailbreak.
I have 1 question, the doubleH3lix is semi-untethered,
are you working on a untethered version ?, so yes i will wait.
There will be no untethered version.
Haven’t tried previous versions, but the “beta” works perfectly on iPad 5! Success on 1st try! Wow.
Switched from g0blin.
same thing happened to me as well like
i was already in Jailbroken state from g0blin but I deleted g0blin and downloaded doubleh3lix rc6…restarted my ipad air 2 ios 10.3.3 and I also jailbroke on my first try but after a kernal panic it wasn’t same again it used to take me like 5 or 6 tries to jailbreak so I had to used cydia eraser…
Are you facing any problem with beta version? Like kernal panic and how many tries to get success? Will Appreciate if you could share it with us
i feel g0blin more better than doublehelix about battery, doublehelix very drain battery
Users are reporting that this tool is better in almost all respects.
Hello, I’m thinking about switching from G0blin to DoubleHelix but I’m worried about having to re-install all my tweaks and add back all my sources, I’d have to?
Also I wanna ask you if if the TouchID issue present in G0blin when it comes to stock apps requiring TouchID its also present with Double Helix? Thanx…
1. You don’t need to reinstall Cydia or your tweaks.
2. TouchID works just fine.
I AM NOT GETTING CYDIA BUT MY PHONE IS JAIBREAK BUT CYDIA IS NOT APPEARING PLEASE GIVE SOLUTION.
SSH into your device with iTerminal and enter “uicache” command.
Not working please tell me better way its not conecting in ssh . Please tell me detailed information
If SSH is not working, just reboot and run goblin again. It will enable OpenSSH, everything else will remain as is.
Any way to fixed touch id issue?
TouchID works fine on this jailbreak. Is it working inside apps?
Does double h3lix support the ipad pro 10.5 with ios 10.3.2
Yes, it does.
I thought it doesn’t work with A10 device? CMIIW.
Yes, that’s right.
If im on 10.2 on my iphone 6 with Yalu, can I update to 10.3.3 and jailbreak because ive heard I can’t, also if I remove cydia and jailbreak again with this will I have to reinstall all my sources and tweaks?
1. No, you can’t do that.
2. Yes, you must reinstall everything.
iPad Air on 10.3.1 I sideloaded DoubleHelix jailbreak, when I open cydia it just crashes. So Un-installed D.Helix and tried fresh sideload again, but after jailbreak instals iPad crashes to boot and restarts. I’ve tried jailbreak 5 times, each time back to apple logo.
Try the new version, I have uploaded it above.
Sideloaded new rc7 version, but when I press jailbreak I get instant crash to apple logo and reboot. 🙁
Are you using the experimental build?
Yes I tried the experimental version, but no luck. Just keeps crashing/booting to Apple logo after I touch the Jailbreak button.
Which device do you have?
Ipad Air 1 running 10.3.1 still crashes to Apple logo using DoubleHelix. I tried Meridian and Cydia crashes instantly on loading screen
Meridian is not working yet. Try g0blin.
Thanks for the help guys, but I’m still getting reboots and a cydia that won’t open. Double Helix (experimental) crashes to Apple logo half way through install each time. Meridean installs fine, but cydia opens to loading and crashes each time. Tried re-install many times and DKG etc. options. Goblin installs cydia but crashes on loading and when I reboot and try Goblin again back to apple logo/reboot. (Ipad air 1 on 10.3.1, clean install no tweaks or sideloaded apps except Goblin/DH/Meridian)
Meridian is supposed to do that since it’s not updated yet. I will update the Cydia Eraser tutorial asap.
Fixed it by accident as follows. Used double Helix to install cydia (took 3 tries) but cydia just crashes on loading. So sideloaded iFile, and in the options where you can buy the app…I pressed purchase which funilly opens cydia app,… and guess what it opened cydia to the iFile purchase menu in cydia app. Cydia still doesn’t work at this point as all sources seem to be empty. So I went to sources tab and pop-up appears to update/upgrade Cydia, so full upgrade and now everything seems to work fine. Hope this helps others!
Great!
at the time of running h3lix at the moment you are patching sanbox the iphone restarts
Try the new version.
After many attempts I managed to install double h3lix! I have noticed more stability and less overheating thanks
Welcome.
I have goblin rc2 I can install? but cydia will be reinstalled?
No, Cydia will remain as is and it will work once you open it.
When asked to put in my username and password it asks for “Please sign in with an app-specific password. You can create one at appleid.apple.com” which I created and it still does keeps repeating the same error message…any ideas on what is happening?
Try turning off two-factor authorization.
Thank you so much, it worked perfectly! After trying for so long on other websites, yours was the only method that worked woo!
Welcome, Sophia.
When asked to put in my Apple ID and Password I got this error message: “Please sign in with an app-specific password. You can create one at appleid.apple.com.” But I am sure that I put in the correct username and password, have any guidance on how to move around this issue? Thank you!
I found out how to create an app specific password and it still gives me the same error message…any thoughts?
Its says my username or password is wrong when its not.
Which tool are you using?
In this jailbreak tool cydia extender is needed?
No, but you can use it to resign the app.
i’m already jailbroken goblin rc2 can i change from goblin to doubleh3lix ?
Yes, you can.
how change ip 6 my ios 10.3.2 what i need to do?
Do you want to downgrade?
no bro i just want to change my jailbreak from goblin to doubleh3lix
Alright. You can do that.
Only bug I found is when in the JB state with DoubleH3Lix & G0blin, legit apps which need to connect to an IP within the network fail and not able to work?
Does not happen when running Meridian but Meridian does not give access to Cydia.
Two Paid Apps which don’t work are X-10 Commander and RemoteKitten.
Both require apps connect to the IP of a PC on your network running server software.
As soon as you reboot and not Jailbroken they work again????
Running 10.3.1 on an iPhone 6s.
Why are you using two tools? Using this one is enough. Even I am facing this issue on Electra so I suggest waiting for a fix.
Only using one tool at any one time. (DoubleH3Lix RC6 or G0blin RC2)
Just found the same bug with both tools.
Good to know it is not just me. Any technical reason as to what the jailbreaks are doing which would block communications from a legit app trying to connect to an IP on a local network running a service?
Apps which connect to external servers seem to work fine. eg Wemo, Home, Milestone, Furbo……
Strange problem.
I will try to report it to the developers.
Well it worked on my ipad air 2 ios 10.3.3
I just switched from g0blin and coincidentally/magically when I pressed kick start on doubleH3lix it worked me in my first try..
Thanks bro…
But can u confirm me either if I should try using ext3nder or not? I don’t want to go anything wrong with my device after waiting such a long time for jailbreak.
Hello, Sailesh. You can use it without any worries.
Thanks mate
Welcome.
Is there chance to jailbreak 10.3.2 for iphone 7 plus ?
cause i’m waiting so long for it and i lost hope 🙁
Yes, there is.
my phone still have this random restart after using RC6. my last jailbreak was i think ios9 which is the untethered. This is the first time i use the semi-jailbreak.
This jailbreak can be a bit unstable but it’s still the most stable out of all others.
Will there be another version to come out to fix this problem?
Can’t say anything about that.
any other way to avoid this problem?
There’s no way to do that, unfortunately.
can i expect a new RC to fix the restarting issue?
Yes, try the latest one.
Is the jailbreak finished or there’s more version coming out?
The tool is largely finished but they might release a new RC if some bugs pop up. If you are worried about stability, I can assure you it’s pretty stable.
Will this work on a iPad 2017 Wifi ?
Yes, it will.
does it have tfp0?
As far as I know, no.
i nned RC5 please! link dowload?
Why? Use RC6 as that’s the latest version.
When can we expect jailbreak on iPhone 7+ ios 10.3.1 ?
Meridian jailbreak is in the works and will be released in a few weeks.
Thanks!
But Kernelexploit Failed on iphone6s 10.3.1.I have tried so many times.
Did you try the latest RC? If not, try it. Also, it can take a few tries to get working. If it still doesn’t work, go back to g0blin or yalu.
how to remove cydia? i used RC4 version and want to re-jailbreak using RC5. Hope this will fix the restarting problem.
You don’t need to remove Cydia. Just delete the old app and sideload the new one.
error:
http-win.cpp:160
Couldn’t connect to server
Failed to connect to idmsa.apple.com port 443:Timed out
It’s not able to connect to Apple’s server. Do you have a working internet connection?
I m using Goblin jb ,i wannn switch helix jb so how can i switch?
Delete the old tool and sideload the new one.
how to remove cydia 10.3.3 Goblin
I will upload a tutorial for using Cydia Eraser. Wait.
Just install the ipa for helix the way you did the g0blin ipa and use that to reJB. You may be able to start fresh with cydiaeraser and then use helix but you’d have to check compatibility on cydiaeraser.
im using iphone 6+, why it keeps on restarting my device at random time.
Wait for the next RC update.
I’m having iPhone 7 Plus with iOS 10.1.1 untill now i’ve been using extra_recipe from Luca jailbreak…
my question is… IF THIS IS BETTER THAN EXTRA_RECIPE AND THIS IS LIKE OLD TIME BACK… I MEAN EVEN AFTER REBOOT THE JAILBREAK IS STILL RUNNING OR DO WE STILL HAVE TO REJAILBREAK EVERY AFTER REBOOT?
Thanks everyone for all your hard work…
Hello, Gaffar. This jailbreak is semi-untethered, which means you will still need to rerun the app after a reboot.
Thanks for the reply dear…
i read somewhere they said the new jailbreak will release soon like back in the days… whenever you reboot the jailbreak is ready… but anyways i think in future its gonna come out…
btw you didnt tell me if this jailbreak is much better and smoother than extra_recipe for my iphone 7 plus with ios 10.1.1
No, all tools will be semi-untethered from now on. It doesn’t support iPhone 7.
it says it supports iPhone 7 and 7 plus 😉
oh yeah sorry … my bad it doesn’t support iPhone 7 and 7 plus…
thanks 🙂
Welcome.
iPhone 5s running cydia like butter. The intructions were very easy coming from a guy that hasnt jailbroken since redsn0w 🙂 Thanks a lot!
Welcome, Mushie.
I have used the Meridian to jailbreak my iPad Pro 12.9, however the Cydia is not worked, then I use this tool to rejailbreak my device, after many tries, it’s done, the cydia can open, however it’s blank like the meridian, how can I uninstall the cydia by meridian?
I will upload a Cydia Eraser tutorial asap.
Great News!! For iPhone 6s running iOs 10.3.1 which tool do you recomend for more estable jailbreak?! This one or Meridian?? Thanks a lot for all your post and tutorials, good Job!! 😉
This one over all others right now. Welcome!
it works more than perfect on a iphone 5s – ios 10.3.3.
thx a lot
Welcome, danda.
Everything is fine so but but this: I can not unzip in filza. I also can not ssh in my phone.
How to fix that? (Especially the unzipping)
Which version of Filza are you using?
I use version 3.4
Try using RC5.
No change. I still cant unzip.
Problem persists
Wait for the next RC if that’s the case.
Does not work with my iPad Air 2 Wifi, ios 10.3.1. Says “running exploit” for a second, then crashes and iPad reboots… Sometimes says “kernelexploit failed” and then crashes and iPad reboots. I’ve turned on Airplane mode, doesn’t work either.
Before that, i tried with g0blin, and with Meridian. After a few times jailbreak works, but can’t open Cydia. It always crashes. I can’t ssh either while jailbroken, says “Connection refused” (with Terminal, macbook pro sierra).
Try the RC5.
i use RC5 actually
Alright. A lot of users are reporting this error so wait for a fix by the developers.
ok thanks.
It finally worked, after around 20 reboots ! But Cydia still crashes when i open it. I opened doubleH2lix again, and pressed “run uicache” (i don’t know what it does actually), but Cydia still crashes.
Were you using g0blin or yalu before?
Kernelexploit Failed on iPad Air 2 ios 10.3.3 but works fine on iPhone 6 Plus iOS 10.3.3
Try RC 5 version
Thanks. Yes this happened to me with RC 5 Version
when I install the IPA rc4 and once installed doubleH3lix I give jailbreak I stay running exploit and there is no, any solution? thanks (also probe with rc3 and nothing stays in running the exploit.
What would be the advantage of using this JB tool instead of Yalu? Thanks.
Yalu is a bit unstable (random reboots) while this tool is relatively more stable and also has none of the issues g0blin has.
I have random reboots after installing this jailbreak. I’m using iphone 6+ .
Wait for the next RC version. Did you use any other jailbreak tool before?
my phone still have this random restart. my last jailbreak was i think ios9 which is the untethered. This is the first time i use the semi-jailbreak.
can you use idownloads+ to download the ipa and sign it on device with extender? Also, if i do it this way, does it count as using one of my 3 uses for 3rdParty apps?
Side-Querry: When updating an app like g0blin to rc2, does that burn of those “3 uses”/3-app limit? (Sorry I’ve had trouble finding this out elsewhere).
1. Yes, you can sign apps downloaded via Safari.
2. The limits of Impactor still apply to Extender.
3. No, it will not exceed that limit provided you delete the requisite app before adding the new one.
Thanks, big help! Thanks for maintaining this website. You provide an invaluable service here, much obliged! 😉
Welcome, Dustin!
In my case I did not enjoy cydia and I used rc4 the last normal installation plus cydia nothing
Try the new version.
happy to read that Thanks ^^
I’m going to try it on my ipad mini 4. g0blin drain too much battery.
Great! Let me know how it goes.
Lot’s of exploit failed. try RC5 same issue I have to try 10-15 times before.
Installed since 08 hours, no battery drain for the moment.
Not trying touchID for the moment.
Thanks to tihmstar & siguza for this great job !!
That’s great!
I am coming from Yalu Beta 7 and whenever I go to run DoubleH3lix the application stays in “running exploit” and nothing happens from there. Any suggestions?
Try using the RC4 version.
he is always left in runnig exploit
Try using the RC5 version